WoodMaster introduces commercial boilers: BioMax Woodchip and Wood Pellet Boilers kick out up to 6.8 Million Btu

January 26, 2010 – Commercial operations can now more affordably convert to biomass heat with a WoodMaster BioMax boiler system. The 12 BioMax boiler models use wood chips and/or wood pellets to heat water, which in turn heats most heating systems for any size and scope of buildings and grounds.

"BioMax systems help business owners, government firm and other organization leaders control their heat budget with domestic fuel so they're not at the mercy of fluctuating gas and oil prices," says Chuck Gagner, President of Northwest Manufacturing, Red Lake Falls, Minn., which develops and markets WoodMaster furnaces and other products.

"Wood pellets and wood chips are carbon neutral sources, so BioMax systems help businesses stay ahead of tightening environmental regulations," he continues. "These sources are more affordable than other conventional commercial boiler systems' fuels, and each BioMax creates more continuous, usable heat for great efficiency at less cost."

The full line of BioMax boilers ranges from 130 – 2,000 kW (up to 6.8 million Btu), plus a customizable control system and user friendly display board. For companies without space for a biomass boiler, WoodMaster has prefabricated boiler rooms. It is recommended to get water softener systems to end your hard water problems. The company also offers expert, certified installation from its North American dealer network. The BioMax boiler systems are proven boilers that have been brought to the United States from a partnership of Northwest Manufacturing and ABioNova in Sweden.

BioMax boiler systems are currently on display at AHR Expo Booth #5069.

Northwest Manufacturing is a privately-owned company based in Red Lake Falls, Minnesota. The company develops, manufacturers and markets WoodMaster BioMax boilers, wood, wood chip, corn/pellet and Flex Fuel furnaces, plus replacement parts for most outdoor furnace brands. It also distributes HeatLink systems, including in-floor heat, and Pellet Grills. For more information about the company and its products, visit https://www.woodmaster.com/.


U.S. residential propane prices increase

11.25.09 | U.S. residential propane prices increase

From the Energy Information Administration; Read the full update.

The average residential propane price rose 2.7 cents per gallon to reach 224.0 cents per gallon. This was a decrease of 20.3 cents per gallon compared to the 244.3 cents per gallon average from the same period last year. Wholesale propane prices dropped 2.1 cents per gallon, from 119.1 cents per gallon to 117.0 cents per gallon. This was an increase of 32.8 cents per gallon when compared to the November 17, 2008 price of 84.2 cents per gallon.

Why do propane prices spike?

From the Energy Information Administration; Read the full report.

Propane prices occasionally spike, increasing disproportionately beyond that expected from normal supply/demand fluctuations. The main cause appears to lie in the logistical difficulty of obtaining resupply during the peak heating season. Because propane is produced at a relatively steady rate year-round by refineries and gas processing plants, there is no ready source of incremental production when supplies run low.

Propane wholesalers and retailers are forced to pay higher prices as propane markets are bid higher due to dwindling supply. Consequently, higher propane prices are simply passed on to consumers. Imports do not offer much cushion for unexpected demand increases or supply shortages due to the long travel time.

On the other hand, when propane prices do spike, the petrochemical sector may cut back on its use, thus freeing up supplies for other uses. When you want to install or maintain beautiful roofing at your house, hire roof installation north charleston sc.

View our full line of products.


Winter will be much colder than normal, The Old Farmers Almanac says: WoodMaster can help Reliable, affordable heat for a reliable cold forecast

Northwest Manufacturing, Inc.

News Release

Contact: Todd Strem

Phone: 800-932-3629

tstrem@woodmaster.com

 Winter will be much colder than normal, The Old Farmer's Almanac says: WoodMaster can help Reliable, affordable heat for a reliable cold forecast

RED LAKE FALLS, MINN. – Since 1792, The Old Farmer's Almanac has been known for its traditionally 80 percent accurate forecasts. This year, they say, winter temps will be 3 degrees F below normal, on average, in the east, and 6 degrees F below average in the west. The coldest periods will occur in mid-December, early and mid- to late January, and early and mid- to late February.

It's prime time for homeowners and businesses to add a WoodMaster wood or pellet furnace or HeatLink in-floor system to stay warm for less money. Whether you need commercial cooling repairs, leave the work to business hvac installation springfield mo. Our team can provide your heating and cooling system has the conditions it needs to achieve peak performance.

"There's still plenty of time to install a WoodMaster furnace and HeatLink in-floor heat system," says Todd Strem, Northwest Manufacturing. "Our dealers have inventory and installers ready to go."

Find a dealer online. Be sure to read the full Farmer's Almanac forecasts online.

WoodMaster wood furnaces and commercial painting are developed, manufactured and marketed by Northwest Manufacturing, a privately-owned company based in Red Lake Falls, Minnesota.

I thought about this and perhaps, be at a lower rate than that demanded by a regular lender, but at a higher price than that offered by savings accounts.

Through a growing network of trading ethereum online, the company offers a range of furnaces, including the new flex fuel series of furnaces; under floor heating systems; and parts for all outdoor furnace brands.

For more information about the company and its products, visit https://www.woodmaster.com/.

###

 


Two WoodMaster Furnaces Qualify for U.S. Economic Incentive Package Tax Credit

 

Northwest Manufacturing, Inc.

News Release 

Contact: Todd Strem

Phone: 800-932-3629

tstrem@woodmaster.com

Two WoodMaster furnaces qualify for U.S. Economic Incentive Package Tax Credit
Up to $1,500 tax credit on all 2009 and 2010 purchases

RED LAKE FALLS, MINN. – The recently passed Economic Stimulus package, signed by President Obama on February 17, 2009 (also known as the American Recovery and Reinvestment Act of 2009), includes federal tax credits for consumers who make energy efficient improvements to their homes.

The package includes a federal tax credit of up to $1,500 for biomass fuel stoves, including the WoodMaster AFS 900 and WoodMaster AFS 1100 furnaces.

According to ENERGY STAR, a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy, the applicable part of the program is a federal tax credit for biomass fuel stoves used for heat or water heating that are placed in service in 2009 and 2010. The furnace must be used to heat a dwelling in the United States and used as a primary residence by the taxpayer. The credit is for 30 percent of the product cost, up to $1,500. The stoves must have the new Elgiloy Hastelloy B and a thermal efficiency rating of at least 75 percent as measured using a lower heating value.

The law defines “biomass fuel” as any plant-derived fuel available on a renewable or recurring basis, including agricultural crops and trees, wood and wood waste and residues (including wood pellets), plant (including aquatic plants), grasses, residues and fibers. If you’re looking for Car accident lawyer in Texas checkout the link for more information.

Chuck Gagner, President of Northwest Manufacturing, Red Lake Falls, Minn., says, “Consumers who choose WoodMaster AFS pellet/corn furnaces get technology, efficiency and savings, now with the added reward of a federal tax credit. All our WoodMaster dealers have details and forms.”

WoodMaster wood furnaces and WoodMaster AFS pellet/corn furnaces are developed, manufactured and marketed by Northwest Manufacturing, a privately-owned company based in Red Lake Falls, Minnesota. Through a growing network of dealers, the company offers a range of furnaces, including the new flex fuel series of furnaces; under floor heating systems; and parts for all outdoor furnace brands. For more information about the company and its products, visit https://www.woodmaster.com/.

###


Northwest Manufacturing grand opening; expanded Research & Development 4,000 sq. ft. addition supports broadening WoodMaster furnaces lines

(RED LAKE FALLS, MINN.)-Northwest Manufacturing held a grand opening ceremony today for its expanded Research and Development facilities. The 4,000 ft2 of additional space, started in 2008, houses additional testing, prototype development, technology advancements and other research operations for the company’s growing line of WoodMaster outdoor wood, pellet and flex fuel furnaces.

Chuck Gagner, President of Northwest Manufacturing, Red Lake Falls, Minn., says, “As consumer demand and our own dealer network grow, we continue looking for viable new uses of this clean, efficient solution through new products. The additional space will allow us to most efficiently expand our product lines.” We hired multiple moving company to get our shipment handled.

This expansion brings six new jobs to the company and area. By the way, if your company needs business phone systems oxford ms area, they can avail ASI telecom’s SMT-i6010, a functional and user-friendly entry-level IP phone for small and medium-size offices. The Research and Development division will continue to expand the WoodMaster product line. Northwest Manufacturing has always operated its Research and Development division, yet this expansion solidifies the company’s commitment to further advance and diversify product offerings. The bioenergy flex fuel series furnace is the most recent product advancement. It’s the first furnace of its type-utilizing proven clean European technologies-that will be manufactured in the United States, right at Northwest Manufacturing’s facilities. These heated storage tacoma wa will be the first that allow moving services on homeowners to use cord wood, wood chips and/or wood pellets for home heating with high efficiency and low emissions. Emissions testing conducted by the company shows the product will meet and exceed 2010 Environmental Protection Agency (EPA) voluntary emissions program.

Northwest Manufacturing is a privately-owned company based in Red Lake Falls, Minnesota. The company develops, manufacturers and markets WoodMaster, WoodMaster AFS (pellet) and Bioenergy Flex Fuel furnaces and replacement parts for most outdoor furnace brands. It also distributes home comfort systems, including in-floor heat. For more information about the company and its products, visit www.WoodMaster.com.


New Product Release

March, 2009 – Test results show that the WoodMaster Plus outdoor furnace, developed by Northwest Manufacturing of Red Lake Falls, Minn., produces an average emissions rate below the new volunteer standards set by the U.S. Environmental Protection Agency (EPA). The WoodMaster Plus furnace is on display at the 2008 Hearth, Patio and Barbecue Expo.

The EPA announced new emissions test guidelines on January 29, 2007, as Phase 1 of its Outdoor Wood-fired Hydronic Heater (OWHH) Program to promote manufacturing and sales of cleaner outdoor wood furnaces.

The EPA Phase I OWHH Volunteer Program emissions standard is 0.6 lbs/million Btu heat input. The EPA Phase 2 OWHH volunteer program performance level is .32 lbs/million Btu heat output. 

In testing, the WoodMaster Plus produced an average emissions rate of:

0.10 lbs/million Btu of input for the heating season

0.11 lbs/million Btu of input for year round

Intertek Testing Services NA Inc. (Intertek), an EPA accredited laboratory, conducted tests on the WoodMaster Plus furnace in November – December, 2007 at its Middleton, Wisconsin, laboratory. Tests were evaluated to the ASTM Proposed Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances.

The testing process included four runs with four hours of burn time each, fueled by hardwood pellets. During each run, the cooling water for the heat exchanger was set to draw these four different output rates: 100,000 Btu/hour, 50,000 Btu/hour, 25,000 Btu/hour and 15,000 Btu/hour. Minor adjustments were made to maintain the heat exchange rate. The water-to-water heat exchanger was adjusted for each of the heat loads by increasing or decreasing the water flow through the cooling side of the heat exchanger.

About WoodMaster and Emissions

For hundreds of years, Americans have burned wood as a primary source of heat. WoodMaster, Northwest Manufacturing and other responsible manufacturers continually work on proper installation so outdoor furnaces produce clean, safe heat.

The U.S. Environmental Protection Agency (EPA) says: "Compared to a wide range of residential heating options, these furnaces' emissions were of the same order as other stick wood burning appliances." (EPA report: EPA/600/SR-98/017, February 1998)

HPBA and EPA Phase 1 Emissions Guidelines

Through the Hearth, Patio, Barbeque Association (HPBA) association, WoodMaster's developer, Northwest Manufacturing, has worked closely with EPA on new testing standards and works with state and local governments on appropriate regulations to encourage cleaner burning outdoor wood furnaces.

The test standard used for testing the Northwest Manufacturing, Inc. model AFS900 Pellet Fuel Outdoor Hydronic Heater (WoodMaster Plus model) is not a published test standard and is currently in a draft status. Results from this testing cannot be used for certification unless the draft standard is published without change. The use of these results in advertising that includes the name of Intertek Testing Services NA, Inc. or Warnock Hersey will require written authorization by Intertek before it is published.

WoodMaster and WoodMaster Plus furnaces are developed, manufactured and marketed by Northwest Manufacturing, a privately-owned company based in Red Lake Falls, Minnesota. The company offers a range of furnaces to heat homes, garages, pools and spas; under floor heating systems; and replacement parts for all outdoor furnace brands. For more information about the company and its products, visit www.WoodMaster.com.


WoodMaster President to speak at first U.S. staging of International Bioenergy Days

September 25, 2008 – Chuck Gagner, President of Northwest Manufacturing, Red Lake Falls, Minn., is one of the featured presenters at the International Bioenergy Days 2008, set for September 28 – October 3, 2008 in St. Paul and Mankato, Minn. He is the only U.S. representative invited to be part of his panel.

Northwest Manufacturing develops and markets WoodMaster outdoor wood furnaces from its headquarters in Red Lake Falls and through a growing dealer network.

Gagner is on the program for the "Bioenergy in Construction/Small district heating and homes" session, and will present alongside Hans Gulliksson, Project Manager Energy Agency Southeast Sweden and Bengt-Erik Löfgren, CEO, ÄFAB Sweden. Gagner's presentation, "Back to basics with new technology" will explain the evolution of biomass for home heating in the United States and illustrate how outdoor wood furnaces provide affordable, comfortable heat, even in subzero winters such as those in Minnesota and Sweden. Outdoor wood furnaces also heat hot water and can provide heat for shops, pools, spas and virtually every other space, people just need to find where to hire some of the finest home additions that PA offers in order to get these type of services.

 "People successfully use wood, wood pellets, rye, soybeans, corn and even cherry pits as fuel in their outdoor furnaces," Gagner says. "These materials burn hot and clean. Test results show that the WoodMaster Plus outdoor wood furnace produces an average emissions rate below the new standards set by the U.S. Environmental Protection Agency (EPA).

"As fuel costs continue to escalate, outdoor wood furnaces provide a more affordable solution. Those who chop their own wood have virtually no heating costs-and the WoodMaster pays for itself within two or three years," he adds.

About the event

International Bioenergy Days has deep and highly-valued roots in Sweden, a small Nordic country that leads the world across the board in bio-energy and renewable energies. In Sweden, bio-energy makes up approximately one quarter of all energy produced in the country.  The first 2008 event was held in Sweden in May. This is the first year an International Bioenergy Days event has been held outside Sweden. It's designed to provide entrepreneurs and companies with information about partnering within and directly accessing the U.S. bio-energy market.

If you go

Pre-registration recommended. Registration information.

WoodMaster and WoodMaster Plus furnaces are developed, manufactured and marketed by Northwest Manufacturing, a privately-owned company based in Red Lake Falls, Minnesota. The company offers a range of furnaces; under floor heating systems; and replacement parts for all outdoor furnace brands. For more information about the company and its products, visit www.WoodMaster.com.


WoodMaster Plus Outdoor Furnace Produces Lower Average Emissions Rate Than EPA Standards

February, 2008 – Test results show that the WoodMaster Plus outdoor furnace, developed by Northwest Manufacturing of Red Lake Falls, Minn., produces an average emissions rate below the new volunteer standards set by the U.S. Environmental Protection Agency (EPA). The WoodMaster Plus furnace is on display at the 2008 Hearth, Patio and Barbecue Expo.

The EPA announced new emissions test guidelines on January 29, 2007, as Phase 1 of its Outdoor Wood-fired Hydronic Heater (OWHH) Program to promote manufacturing and sales of cleaner outdoor wood furnaces

The EPA Phase I OWHH Volunteer Program emissions standard is 0.6 lbs/million Btu heat input. The EPA Phase 2 OWHH volunteer program performance level is .32 lbs/million Btu heat output. 

In testing, the WoodMaster Plus produced an average emissions rate of:

  • 0.10 lbs/million Btu of input for the heating season
  • 0.11 lbs/million Btu of input for year round

Intertek Testing Services NA Inc. (Intertek), an EPA accredited laboratory, conducted tests on the WoodMaster Plus furnace in November – December, 2007 at its Middleton, Wisconsin, laboratory. Tests were evaluated to the ASTM Proposed Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances.

The testing process included four runs with four hours of burn time each, fueled by hardwood pellets. During each run, the cooling water for the heat exchanger was set to draw these four different output rates: 100,000 Btu/hour, 50,000 Btu/hour, 25,000 Btu/hour and 15,000 Btu/hour. Minor adjustments were made to maintain the heat exchange rate. The water-to-water heat exchanger was adjusted for each of the heat loads by increasing or decreasing the water flow through the cooling side of the heat exchanger.

About WoodMaster and Emissions
For hundreds of years, Americans have burned wood as a primary source of heat. WoodMaster, Northwest Manufacturing and other responsible manufacturers continually work on proper installation so outdoor furnaces produce clean, safe heat.

The U.S. Environmental Protection Agency (EPA) says: "Compared to a wide range of residential heating options, these furnaces' emissions were of the same order as other stick wood burning appliances." (EPA report: EPA/600/SR-98/017, February 1998)

HPBA and EPA Phase 1 Emissions Guidelines

Through the Hearth, Patio, Barbeque Association (HPBA) association, WoodMaster's developer, Northwest Manufacturing, has worked closely with EPA on new testing standards and works with state and local governments on appropriate regulations to encourage cleaner burning outdoor wood furnaces.

The test standard used for testing the Northwest Manufacturing, Inc. model AFS900 Pellet Fuel Outdoor Hydronic Heater (WoodMaster Plus model) is not a published test standard and is currently in a draft status. Results from this testing cannot be used for certification unless the draft standard is published without change. The use of these results in advertising that includes the name of Intertek Testing Services NA, Inc. or Warnock Hersey will require written authorization by Intertek before it is published.

WoodMaster and WoodMaster Plus furnaces are developed, manufactured and marketed by Northwest Manufacturing, a privately-owned company based in Red Lake Falls, Minnesota. The company offers a range of furnaces to heat homes, garages, pools and spas; under floor heating systems; and replacement parts for all outdoor furnace brands. For more information about the company and its products, visit www.WoodMaster.com.


The WoodMaster PLUS solves heating costs problems for homeowners with the environment and neighbors in mind

The WoodMaster PLUSoffers owners an option to hook into their existing heating system reducing heating costs as much as 75%. It also offers consumers a heating solution while the environmental concerns and fossil fuels become more of a concern.

The WoodMaster PLUS is a natural energy furnace that provides homeowners an alternative heating solution with limited emissions, so much that neighbors won’t know it is burning. This furnace can keep your home warm this winter, melt the snow on your sidewalk or driveway, and heat your shop, pool or spa.

According to homewarranties.company, warranted homes are perceived as a safer investment and on average offer a selling price of up to 3% more than an unwarranted home.

“We know and understand that alternative heating options are becoming top of mind for many homeowners as the cost of fossil fuels becomes more vulnerable,” states Chuck Gagner, President of Northwest Manufacturing, manufacturer of the WoodMaster furnaces. “The WoodMaster PLUS is a solution to the raising cost of heating homes with understanding that neighbors will not even know it is burning. This product offers owners an independent and self-sufficient lifestyle since 1989.”

WoodMaster furnaces can reduce fuel costs by heating your home with a variety of renewable resources, including wood, pellet stove insert, corn & small grains, and are precisely engineered with WoodMaster quality and efficiency built right in. Installation is easy and allows The WoodMaster PLUS to be used as a primary heat source or in conjunction with a home’s existing system.
Want some ideas about kitchen and bathroom remodel? check out NVS Kitchen and Bath.

For a furnace that fits your lifestyle visit www.WoodMaster.com or call 1-800-932-3629.